Atlas Copco CP275 Tier II, Instruction Manual

Page: 56 / 120

Long-term parking
48
4812268997.pdf
2017-05-10
Watering system
* Empty the water tank and all hoses of water.
Empty the filter housing and the water pump.
Undo all sprinkler nozzles.
See maintenance sections for "Watering system –
draining”.
Fuel tank
Fill the fuel tank completely full to prevent
condensation.
Hydraulic reservoir
Fill the hydraulic reservoir to the uppermost level
mark (see under the heading ‘Every 10 hours of
operation.’)
Tires
Make sure that tire pressures are at least 380 kPa
(55 psi).
Steering cylinder, hinges, etc.
Grease the steering cylinder piston with
conservation grease.
Grease the hinges on the doors to the engine
compartment and the cab.
Hoods, tarpaulin
* Lower the instrument cover over the instrument
panel.
* Cover the entire roller with a tarpaulin. A gap
must be left between the tarpaulin and the ground.
* If possible, store the roller indoors and ideally in
a building where the temperature is constant.