Atlas Copco CP275 Tier II, Instruction Manual

Page: 100 / 120

Maintenance – 1000h
92
4812268997.pdf
2017-05-10
Fuel tank - Cleaning
It is easiest to clean the tank when it is almost empty.
1
Fig. Fuel tank
1.Oil drain pump
2
Pump out any bottom sediment using a suitable pump,
such as an oil drain pump.
Place in a suitable container and hand in to
environment-friendly waste disposal station.
Keep in mind fire risk when handling fuel.
Watering system – Draining
1
Remember that there is a risk of freezing
during the winter, pump, filter and lines, or mix
antifreeze in the water.
There is a drain valve (2) in the area for the pump
system on the water tank. This can be used to drain
both the tank and parts of the pump system.
Fig. Pump system
1. Filter housing
2. Drain valve
1
Fig. Air filter
1.Backup filter
Backup filter - Change
Change the backup filter with a new filter after every
fifth replacement or cleaning of the main filter.
The safety filter must not be cleaned.
To change the backup filter (1), pull the old filter out of
its holder, insert a new filter and reassemble the air
cleaner in the reverse order.