Atlas Copco CP275 Tier II, Instruction Manual, Page: 113 / 120

Additional instruction
105
4812268997.pdf
2017-05-10
Fig. 1.Water/oil select switch
2.Oil level warning LED
3.Oil spray switch
4.Water/oil sprinkle time control
Oil spray system (Optional)
Before starting
Check the oil level of the tank, if the oil level warning
LED is on please fill the “plant oil”
Check the distance between the cover and tire’s
surface (1) no less than 20 mm.
Check the distance between the oil spray nozzle and
tire’s surface is about 150mm;
The distance can be adjusted easily by through the
fixing bolts (2) of the bracket to avoid over spraying
beyond tire or missing spray.
CAUTION: The system must keep clean, use
relatively high solidifying plant oil, such as soybean oil.
In cold season, check oil by place the oil outdoor at
night; if oil has been frozen, stop using the oil. Make
sure only use unfrozen oil.
Starting
Switch on the battery switch;
Ignition switch on, if the oil level is less than the low
limit, the LED is on;
Water/oil select switch turns to oil spray;
Oil sprinkle time control. The position switch has
0~3 four positions. It means spray lasting
3s.6s.9s.12s.depends on which position is
pre-selected;
Press the oil spray switch.
1
2
2
3 4 1