Atlas Copco CP275 Tier II, Instruction Manual

Page: 42 / 120

Operation
34
4812268997.pdf
2017-05-10
Before starting
1. Control panel and lights - Check
Turn the ignition key (2) to “ON” position, neutral position indicator (5), parking
indicator (4) and control indicator (1) or (3) on operator side are all activated.
Make sure the parking brake button (7) is on “pressed” condition.
Make sure the emergency stop button is on “unpressed” condition.
Make sure the fuel gauge, water level gauge have readings, oil pressure alarm is “on”.
2. Forward and backward lever - Check
To start the machine the forward/backward lever
must be in neutral position, in the middle.
Before starting, make sure the throttle is in idle
state.
(the state showed in figure is on the left operation
side)
1
6
5
4
7 1 2
3
1