![background image](http://html1.mh-extra.com/html/atlantis/splash-tech-r60/splash-tech-r60_service-manual_3000615029.webp)
Turn the body over carefully and position the body in the fixture or on table so that the main
spring is facing down.
Lightly lubricate the new O-rings from the annual service kit with LTI Christo-Lube MCG 111®.
Install O-rings (18, 19 and 20) onto the balance plug (21).
Lightly lubricate the stem of the HP seat (16). Snap the end of the spring (17) over the ledge
on the HP seat. Insert the valve and spring into the balance plug (21).
Install the balance plug and valve assembly onto the end of the 1st stage.
Take care to insure that the HP seat (16) fits over the stem of the lifter (9) as you install the
assembly into the body.
Screw the balance plug (21) assembly into the body with a 6MM HEX BIT SOCKET. Tighten
to 2-3 ft/lb (3-4 Nm) torque or just until you feel firm metal to metal contact stopping the
rotation of the parts.