Install the filter (4) and the new O-ring (5) into the yoke retainer. Support the yoke retainer so
that the body is facing up. Hand tighten the yoke and yoke retainer into the body (8).
Note: If the regulator has a DIN connection, install the DIN housing (26) with a new O-ring
(5), filter (4) and saddle (7) into the body as described for the yoke assembly.
STAINLESS HANDLE BAR screw in hp port or place the body (8) carefully into a fixture so
that the yoke retainer or DIN housing is facing up.
Tighten the yoke retainer with a 1” HEX SOCKET or 13/16” HEX DEEP SOCKET for the din
housing, follow the Torque Specifications.
If the regulator has a DIN connection. Install the din wheel (27) into the din housing (26).
Install the o-ring (28, 30) into the din retainer. Hand tighten the din retainer (29) into the
din housing (26). Tighten the din retainer with a 1/4” HEX BIT SOCKET, follow the Torque
Specifications.