![background image](http://html1.mh-extra.com/html/atlantis/splash-tech-r60/splash-tech-r60_service-manual_3000615012.webp)
Use the 6” and 8” adjustable wrenches to loosen the hose nut from the PORT of the 1st
stage. Remove the hose assembly from the second stage.
Inspect the hose assembly for any cuts or cracks, especially on the hose at the metal
ferrules. Blow the interior bores of the hoses.
Replace the hose assembly if any cuts or cracks are found. Remove and discard the O-rings
from each end of the hose. Clean, rinse, and blow-dry the interior bores of the hoses. Replace
the hoses if necessary.