Atlantis onepower 701, User Manual

Page: 33 / 53

33
wiring fault indicator is
lit. to neutral wire reversal. correct the building
wiring.
A.1.2 Upsilon2000
Situation Solution
How to install the
UPSilon2000. Once started the UPS you can connect it to PC through USB
cable. At this time the SO detects and installs automatically all
drivers. Now you can install UPSSILN2000 on the PC.
PC doesn’t find the
UPS.
1. Check if the cable is properly connected
2. Use the original cable
3. Launch Upsilon2000, then click on INSTALLATION and
check that TYPE OF COMMUNICATION is (USB).
A.1.3 Battery and Fuse
Situation Solution
Backup time The battery backup time (sometime called battery reserve
time or battery autonomy) is the length of time the battery
will supply power to the load during a power failure. You can
check on the Appendix Backup Time .
Wich type of
battery does UPS
use?
12VDC- 7A/h or 12VDC- 9A/h (A03-P841)
How often do I
have
to change
battery?
Atlantis recommends to replace the batteries once a year.
Where can I find
batteries?
1. please contact Your reseller.
2. please contact directly Atlantis.
How can I check
the Fuse?
Check the fuse to be sure it is not blown or damaged. Also,
make sure the fuse makes good contact and is not loose in the
fuse holder. Ensure that you are using the correct size fuse. If
you replace the fuse and the UPS again blows the fuse, please
contact Atlantis.
Fuse specification. [6.5A, 250Vac on A03-P701], [8A, 250Vac on A03-P841] You
can found on the rear panel (AC Fuse holder) a fuse.