1
USER’S MANUAL
Dear Customer,
.
Congratulations on your purchase of the new Atlantis Hot Beverage Vendor.
This Product is guaranteed to be free from facts in workmanship and material,
under normal use and service, for a period of 12 months from date of original
purchase.
SPECIAL FEATURES OF THE ATLANTIS HOT BEVERAGE VENDOR
24 Volts DC motor
Fully programmable
Password protected
Magnetic sealing door to ensure that cockroaches do not get into the machine
IN CUP TEMPERATURE AS HIGH AT 85 DEGREE CAN BE OBTAINED
Manually adjustable solenoid valves
SS heating element
Waste tray with optional drain facility
Membrane switches for easy accessibility
Float valve with buzzer for low water level indication
Adjustable temperature through controller card
Compact and easy to maintain.
Easy to service
2
HOT BEVERAGE DISPENSER
INSTALLATION
Before using this machine, this manual must be read carefully.
The machine should not be installed in place that may exposed to sprayed
water and they likewise should not be cleaned using sprayed water.
The user or person responsible for relling & cleaning the machine must follow
the instructions set forth in this manual.
Do not touch the product with your hands & prevent liquids from falling inside
the product canisters.
If any maintenance task needs to performed & the machine is going to be
disconnected for a long time period, the boiler and canisters must be empty.
Only trained service technician are authorised service/dismantle any component
of the m/c.
Appropriate ELCB is be provided by the outlet before installation of the m/c.
Proper earthing is must with 3 pin, 15A supply socket at the outlet.
Switch off the power supply and unplug the main supply cord before carrying
out any cleaning and maintenance operations.
Do not touch the machine with wet or humid hands.
Do not unplug the machine from the source by pulling the power supply cable.
Do not allow children or untrained people to play with machine.
GENERAL SAFETY INSTRUCTIONS
Portable Drinking Water
INSTALLATION
Installation Required at Site
Free space required
Refer m/c dimensions given in technical
data. Apart from space covered by the
m/c, 6” free space required all around
the m/c. for maintenance purpose.
Power Supply
230V, 50Hz, 15Amps power socket with
proper earthing & within 1.5 mtrs. distance
from m/c.
Quality of Water
Unpacking
Unpacking the m/c carefully at the installation site and securely place the
machine on a platform. Check contents of the packaging which consists of : -
a. Machine
b. Drip Tray Jali
c. User Manual with Warranty Card.
d. Machine Key
e. Main Lead 15Amp
1 Nos.
1 Set
1 Nos.
2 Nos.
1 Nos.
TECHNICAL SPECIFICATION
Weight (Kg.)
Dimensions (HxWxD) mm
Power (Watts)
Power Source
Operating Voltage
Start Up Time
Premix Canister /Capacity
Dispensing Rate
Front Door
Steam Dispersion
Hot Water Tank Material/Capacity
Descriptions
16
640x320x350
2000 Watts
220V/1p/50Hv
24 V DC
8 Minutes
2 Nos. of 1.2 Kg. each
4 cups per minutes
ABS Moulded
Exhaust Fan
SS 304 Stainless Steel
3.0 Ltr.
20
640x320x470
2000 Watts
220V/1p/50Hv
24 V DC
8 Minutes
3 Nos. of 1.2 Kg. each
4 cups per minutes
ABS Moulded
Exhaust Fan
SS 304 Stainless Steel
3.0 Ltr.
21
640x320x470
2000 Watts
220V/1p/50Hv
24 V DC
8 Minutes
4 Nos. of 1.2 Kg. each
4 cups per minutes
ABS Moulded
Exhaust Fan
SS 304 Stainless Steel
3.0 Ltr.
2 Lane
3 Lane
4 Lane
* Actual design, colour and specications may very from the images shown.
