PROGRAMMING INSTRUCTIONS – CAFÉ MINI
6
HOT BEVERAGE DISPENSER
The Atlantis Café mini is a fully programmable machine which can be customized
to the customer's requirements. Please follow the simple instructions below to
program your machine.
.
Press the STOP switch for 3 sec. and the machine enters the programming mode
Now we would be using the COFFEE TEA and HALF switches to program the
m a c h i n e .
.
Immediately as we enter the programming mode, the display would show PREMIX1
3.75. This indicates the dispensing time in seconds for the powder from the coffee
canister. There would also be a cursor under the number before the decimal
(3 in the above case). The COFFEE and TEA switches can be used to increase or
decrease this number. Once done, press the HALF switch and the cursor would then
move to the digit after the decimal point. The HALF switch would henceforth play
the role of an ENTER/SAVE button
.
The increase or decrease would change in direct proportion to the settings. So a
setting at 5.0 would mean that 10% more powder is dispensed than at 4.5 sec.
Press HALF (enter) again and the display would show WATER1 5.0. The cursor
would be under the number 5. Follow the procedure to change the quantity of water
in the coffee side as above.
.
Press HALF and the display would show PREMIX2 3.75. This refers to the quantity
of tea powder dispensed. Changes can be made as above.
.
Press HALF again for WATER 2 (water from the tea side). Make changes as above.
Note that the setting for WATER would always be 1.0 sec more than the respective
premix. This would ensure that the water would always flow more than powder and
not allow accumulation of powder in the mixing bowl.
.
Press HALF button again and the display shows HOT WATER 5.0. This is the
quantity of water which is dispensed when we push the HOT WATER button
.
The quantity can be adjusted by using the COFFEE and TEA buttons and saved by
pressing the HALF button as above.
.
Press HALF again and the display shows TEMP 85. Again this can be adjusted (to a
maximum of 89 degree) by using the coffee and tea (up and down) switches.
THE DEFAULT PASSWORD IS CURRENTLY ENTERED BY PRESSING HALF 5
TIMES. NO NUMBER NEEDS TO BE ENTERED.
.
Press HALF again and the display would show ENABLE COIN. Only applicable
to coin operated machine. Using the COFFEE and TEA we can enable – YES or
disable the coin mechanism - NO.
.
5
USER’S MANUAL
Remove the machine form its outer packing and place the machine on a flat even
surface.
.
Overturn a bottle of water (2 ltrs to 25 ltrs) over the machine
.
DO NOT TURN THE MACHINE ON TILL THE WATER HAS COMPLETELY
FILLED UP INSIDE THE MACHINE. THIS POSITION IS REACHED WHEN
THE BUBBLES STOP APPEARING INSIDE THE BOTTLE.
.
Switch the machine on from the mains and then from the switch behind the
front door.
.
The Display would indicate “Please wait – heating”
.
The display would toggle between the above sign and the temperature on the front
display.
.
The cup counter comes on the screen after you push the half cup button for
3 seconds.
.
The machine would not dispense till such time as the set water temperature is reached
Fill us the canisters with the premix (coffee in the left canister and tea in the right one)
Once the desired temperature has been reached, the machine is ready for dispensing
Make the desired choice from the membrane panel at the base of the door.
Please note that the first cup of coffee and tea would have less powder as the
machine has not yet been “primed”.
.
PLEASE NOTE THAT THE MACHINE ARRIVES WITH DEFAULT SETTINGS
OF 12.7 GMS OF PREMIX AND 90 ml OF WATER. YOU CAN CUSTOMIZE
T H E S A M E T O Y O U R TA S T E B Y F O L L O W I N G T H E S I M P L E
INSTRUCTIONS BELOW.
.
For half cup, please press the HALF switch and then your choice of either
COFFEE or TEA.
.
Similarly for just hot water, press HOT WATER followed by COFFEE or TEA.
This feature can also be used for flushing out the system at the beginning of the
day for cleaning purposes.
.
The STOP switch is used when an incorrect choice has been made and we would
like to abort the operation midway .
In case the temperature of the water is less than 10 degree C, of set temperature
the machine would not dispense any premix or water
.
In case the water level in the container is low, the display would show
WATER LEVEL LOW and the buzzer would sound. The machine would not
dispense in this mode.
Please read the instructions below prior to using the machine.
USAGE INSTRUCTIONS FOR THE CAFÉ MINI
