
EN
53
Product
presentation
Installation
Settings /
Operation
Maintenance,
Servicing and
Troubleshooting
Warranty
Settings / Operation
Control panel
1.
Power strip
Acknowledging
Malfunction message
and standby mode
button
Heat pump operation
indicator
Installer indicator
Electric booster pump
operation indicator
Adjusting the set point
temperature
Mode selection dial
ECO mode (set point
temperature at 54°C)
Absence mode
Pictogram description
2.
Symbol
Name
Description
Heat Pump
Compressor and fan
This LED indicates that the heat pump is in operation.
Electric booster pump
This LED indicates that the electric booster pump is in Operation.
Installer indicator
This LED indicates the presence of a malfunction (solid) or the
standby mode is on (flashing)
Acknowledging malfunction
message button
A short press on this button acknowledges the malfunction.
A long push allows you to switch to standby mode.
This is to be done only on the request of the customer service.
Eco mode
This LED indicates that the ECO mode is activated.
Select this mode to reduce the production of hot water to maximize
energy savings (T° = 54° C).
Absence mode
This LED indicates that the ABSENCE mode is activated. Select this
mode for freeze protection (15°C) of the water heater and for an
extended absence.
Adjusting the desired/set
point temperature
This LED indicates that the manual set point temperature setting is
activated. Use the dial to set the set point temperature between 50°C
and 62°C.