15
ATIM_ACW-DINDIO_868_UG_EN_V1.3
In this configuration, the master modem and the slave modem have identical configuration of the inputs
and outputs, the master modem sends a radio frame representing the state of its inputs to the slave
modem which copies the state of the received inputs to its outputs and which immediately returns the
status of its entries to the master modem.
Click on the 3rd tab of the configuration tool called "Mirror". One of the two modems must be declared
as master and the other as a slave using the "Operating mode" drop-down list.
The "@Modem" modem address of the slave product must match the "@Remote" address of the master
product. The radio channel and the baudrate must also be identical on both products. Please refer to
the ARM-Nano User Guide for the frequency corresponding to the channel. TimeOut acts as a watchdog.
It is configurable from 0 (disabled) to 10 seconds. If no frame has arrived at the product within this
time then the modem output goes to 0.
The master modem instantiates communication with the slave modem to send the state of its input 1
and retrieve the state of input 1 of the slave modem. In order to enable you to validate the installation,
the green leds on both modems must illuminate when the communication is effective.
