10
ATIM_ACW-DINDIO_868_UG_EN_V1.3
o
The modem address is the address of your ACW-DINDIO, each modem must have a different
address.
o
The remote address is the address of the device with which you want to communicate.
o
TimeOut acts as a watchdog. It is configurable from 0 (disabled) to 10 seconds. If no frame
has arrived at the product within this time, then the modem output goes to 0.
If you do not set one of the statement periods fields. When you click the Write key, an Invalid message
will appear next to it and a window will indicate which field is in default.
✓
Setup
Once you have completed the configuration, click on the Write button to validate it. After a few
seconds of waiting, a message appears next to it to inform you if the module update succeeded or
failed.
Note
This is when the module synchronizes with the time of your PC.
✓
Default
Resets the original values. After clearing the saved values, you can configure the ACW-DIO again.
Once the configuration is complete, do not leave the module connected to USB. This mode
of operation is very energy intensive. When you remove the USB link without disconnecting
the power, the modem automatically returns to normal operation. On power up, a first radio
transmission is made in the 60s.
Lights meaning
In USB configuration mode, the green LED flashes slowly until the configuration is completed and the
USB cable is removed.
a.
Local 868MHz
The green status indicator illuminates when the product is powered. After a few seconds, a data
transmission is performed. If the request is successful, the green LED illuminates briefly, in case of a
failure the red LED lights up.
