manualshive.com logo in svg

Aticio IS 2316, Operating Instructions Manual

Share
Download
Aticio IS 2316 Operating Instructions Manual Download Page 60

System Settings

52

2

❖

POP before SMTP

Specify POP authentication (POP before SMTP).
When sending e-mail via an SMTP server, you can enhance the level of SMTP
server security by connecting to the POP server for authentication.
To enable POP server authentication before sending e-mail via the SMTP
server, set 

[

POP before SMTP

]

 to 

[

On

]

. E-mail is sent to the SMTP server after the

time specified for 

[

Wait Time after Auth.

]

 has elapsed.

If you select 

[

On

]

, enter server name in 

[

Reception Protocol

]

. Also, check the

port number for 

[

POP3

]

 in 

[

E-mail Communication Port

]

.

• Wait Time after Auth.: 

300 msec.

Specify 

[

Wait Time after Auth.

]

 from zero to 10,000 milliseconds, in incre-

ments of one millisecond.

• User  Name

Enter the user name using up to 63 characters. Spaces cannot be entered.

• E-mail Address
• Password

Enter the password using up to 63 characters. Spaces cannot be entered.

The default setting is 

Off

.

❖

Reception Protocol

Specify Reception Protocol for receiving Internet Fax.
The default setting is 

POP3

.

❖

POP3/IMAP4 Settings

Specify the POP3/IMAP4 server name for receiving Internet faxes.
The specified POP3/IMAP4 server name is used for 

[

POP before SMTP

]

.

• Server  Name

If DNS is in use, enter the host name.
If DNS is not in use, enter the POP3/IMAP4 or server IPv4 address.
Enter POP3/IMAP4 server name using up to 127 alphanumeric characters.
Spaces cannot be entered.

• Encrypt

• Auto

Password encryption is set automatically based on the POP server set-
tings.

• On

Encrypt password.

• Off

Do not encrypt password.

The default setting for Encrypt is 

Auto

.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for IS 2316









































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands