Aticio IS 2316 Operating Instructions Manual Download Page 56

Page: 56 / 296

System Settings

❖

Host Name

Specify the host name.
Enter the host name using up to 63 characters.

❖

Machine Name

Specify the machine name.
Enter the machine name using up to 31 characters.

Reference

p.4 “Accessing User Tools”

Parallel Interface

This section describes the user tools in the Parallel Interface menu under Inter-
face Settings.

[

Parallel Interface

]

is displayed when this machine is installed with

the IEEE 1284 interface board.

❖

Parallel Timing

Sets the timing for the control signal of the parallel interface.
The default setting is

ACK outside

❖

Parallel Comm. Speed

Sets the communication speed for the parallel interface.
The default setting is

High Speed

❖

Selection Signal Status

Sets the level for the select signal of the parallel interface.
The default setting is

High

❖

Input Prime

Sets whether to validate or invalidate the input prime signal upon reception.
The default setting is

Inactive

❖

Bidirectional Comm.

Sets the printer's response mode to a status acquisition request when using a
parallel interface.
The default setting is

When set to

[

Off

]

, bidirectional communication function will be disabled, and

the printer driver will not be installed under Windows Auto Detect function.

❖

Signal Control

Specify how error during printing or sending facsimile from the computer is
to be dealt with.
The default setting is

Job Acceptance Priority

Reference

p.4 “Accessing User Tools”

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for IS 2316









































































































































































































































































































Search results

Summary of Contents for IS 2316

Reviews:

Brands by name

Popular brands

Aticio IS 2316, Operating Instructions Manual

Search results

Summary of Contents for IS 2316

Reviews:

Brands by name

Popular brands