ATI
Q46C2 2Electode Conductivity System
Part 2
– Analyzer Mounting
10
O&M Manual
Rev-H (6/19)
2.2
Wall or Pipe Mount
A PVC mounting bracket with attachment screws is supplied with each transmitter (see
dimensions). The multi-purpose bracket is attached to the rear of the enclosure using the four flat head
screws. The instrument is then attached to the wall using the four outer mounting holes in the bracket.
These holes are slotted to accommodate two sizes of u-bolt that may be used to pipe mount the unit. Slots
will accommodate u-bolts designed for 1½
“or 2” pipe. The actual center to center dimensions for the u-bolts
are shown in the drawing. Note that these slots are for u-bolts with ¼-
20 threads. The 1½” pipe u-bolt (2”
I.D. clearance) is available from ATI in type 304 stainless steel (47-0005)
.
Figure 2 - Wall or Pipe Mount Bracket
