Manual, Robotic Deburring Tool, RCV‑490 Series
Document #9610‑50‑1032‑06
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati‑ia.com
21
Table 4.1—Bur Selection
Materials/Application
Features/Benefits
9150‑RC‑B‑24645–Aluminum Cut, 3/8” Bur Diameter, 5/8” Bur Length,
1/4” Shank
•
For greasy aluminum alloys, soft
non‑ferrous metals
and thermoplastics
•
For deburring
•
For use on cast aluminum
•
Easy chip flow‑through positive
rake angle, rounded base of
tooth, convex tooth back
•
No loading of the flutes, not
even while cutting sticky metals
•
Smooth operation due to the
peeling effect of the teeth
9150‑RC‑B‑26408–Cut FVK, 1/4” Bur Diameter, 5/8” Bur Length, 1/4”
Shank
•
For trimming and contour milling
of all glass and carbon fiber
reinforced plastics
•
Special cut geometry allows
high feed rates due to low
cutting forces
9150‑RC‑B‑24862–Alt Diamond Cut, 1/4” Bur Dia., 3/4” Bur Length, 1/4”
Shank
•
Universal use, for ferrous and
non‑ferrous metals, plastics
•
Rough finishing of castings
•
Surface working
•
Weld removal
•
Brazed welds
•
Smoother operation, improved
tool control
•
High cutting action
•
Non‑clogging
•
Smaller chips, reduced slivers
•
Even, smooth surfaces
