Manual, Robotic Deburring Tool, RCV‑490 Series
Document #9610‑50‑1032‑06
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati‑ia.com
11
3. Installation
The RCV‑490 is delivered fully assembled. Optional equipment, such as: mounting adapter plates, burr tools, and
additional collets will be sold separately.
3.1 Protection During Transportation
The RCV‑490 is packaged in a crate that secures and protects the tool during transportation. Always use the
crate when transporting the RCV‑490 in order to minimize the risk of damage.
3.2 Inspection of Condition When Delivered
Upon receipt, the following should be checked:
•
Delivery in accordance with freight documents
•
Packaging is in good condition
If there is damage to any of the packaging, or if any of the goods have been exposed to abnormal handling,
unpack those parts that may have been damaged for a closer inspection. Notify ATI for assistance in the
evaluation of the product condition, if necessary.
3.3 Unpacking and Handling
The RCV‑490 should always be placed inside the accompanying crate while transporting,
storing, and handling.
Pneumatic lines are attached, bundled, and must be strain‑relieved in a manner that allows for freedom of
movement during operation.
3.4 Storage and Preventive Maintenance During Storage
The RCV‑490 should always be stored in its crate, when not in use. The RCV‑490 should be stored in a
dry place. For long‑term storage, the RCV‑490 should be thoroughly cleaned of any burrs or debris. Do not
disassemble the RCV‑490. Place the RCV‑490 within a sealed plastic bag inside the crate.
