ATH-Heinl 80424200937, Operating Instructions Manual

Page: 96 / 450

® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-10
Manufacturer ATH-Heinl GmbH & CO.KG
- 38 -
CLEANING THE VALVE BLOCK
 Separate the air pipes (H) from the valve block
(V).
 Clean the valve block (V) using compressed air.
The valve block may need to be replaced.
 Clean the silencers (S). If these are damaged,
they must be replaced.
SETTING THE MOUNTING HEAD

Loosen the fixing screw (1) on the mounting
head

The angle of the mounting head to the rim can
be set by tightening and/or loosening both
grub screws (2)
 The bead guide (4) projects approx. 6-7 mm
over the rim flange. The approach roller (3)
contacts the rim flange.
 After setting, ensure that both grub screws (2)
and the fixing screw (1) are secured again.
CHECKING AND REFILLING THE GEAR OIL

Turn the clamping plate to a position from
which it is easy to access the oil filler neck

Now remove the protective cover

Insert a flexible and transparent hose into the
opening and stop when the hose contacts the
base of the gear unit.
 Now, hold the end of the hose shut so that no
more air can get in.
 Next, remove the hose. The oil level must be at
least 25 mm.
 If necessary, refill with the required amount of
oil.
3