ATH-Heinl 80424200937, Operating Instructions Manual

Page: 95 / 450

® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-10
Manufacturer ATH-Heinl GmbH & CO.KG
- 37 -
V-BELT TENSIONING
 The machine contains a motor (1) which
drives the worm gear (3) using a V-belt (2).
 In order to tension, you must loosen the
motor fixing screws.

Next, loosen the counter nut (B)

The V-belt is tensioned by turning the
screw (A).
o When pressed down (in the centre),
the V-belt should give by a
maximum of 8 mm.
 The counter nut (B) and all motor fixing
screws must be tightened for final fixing.
 The final stage is to reassemble the cover.
PNEUMATIC LOCKING OF THE MOUNTING HEAD

The force and/or tension of the cylinder is
set by tightening and/or loosening the
screw (B).

The automatic distance to the rim is set by
tightening and/or loosening the nut (A).
SWIVEL SPEED
 The swivel speed to the front and/or rear can
be set by opening and/or closing the valves
(A+B).
A
B
3
2
1