ATH-Heinl 80424200937, Operating Instructions Manual

Page: 65 / 450

® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-10
Manufacturer ATH-Heinl GmbH & CO.KG
- 7 -
Operating the assist-arm:
The lift truck (A2) can be moved up or down by operating the
control lever (A1).
A1 is the control lever for the upwards and downwards
movement of the assembly roller and bead pusher.
1.3 Operation
1.3.1 Determining the wheel rim cut
On some wheel rims, the nut in the middle of the wheel rim is
very flat or there is no nut.
This type of wheel rim is not authorised for sale in some
countries.
On some wheel rims, the nut in the middle of the wheel rim is
very deep, meaning that, for assembly or disassembly, the tyre
has to be pushed in very deep. This increases the risk of
damaging the tyre.
Some wheels have a tyre pressure control system. This system
may not be damaged on assembly or disassembly.
A1
A2