ATEN VP1420 User Manual Download Page 67

Page: 67 / 118

Chapter 6

Video Presentation Control App

Overview

The ATEN Video Presentation Control App is designed to help you conveniently

configure system settings to your VP1420 / VP1421 device.

Supported Systems

The ATEN Video Presentation Control App supports the following mobile
operating systems:

Installing and Configuring the App

1. Install the ATEN Video Presentation Control App on a mobile device.

a) From the mobile device, tap the

App Store

Google Play

icon.

b) In the search box, type “ATEN Video Presentation Control App”.

c) Tap

ATEN Video Presentation Control App

and install the app.

Or,

d) Scan the QR Code below to install the app.

2. From the mobile device, tap the

ATEN Video Presentation Control App

icon

Note:

Make sure to connect the mobile device to the network where the
VP1420 / VP1421 is installed.

Mobile Operating System

Supported Versions

Android

version 8.0 or later

iOS

version 12 or later

Summary of Contents for VP1420























































































































Search results

Summary of Contents for VP1420

Reviews:

Related manuals for VP1420

Brands by name

Popular brands

ATEN VP1420, User Manual

Search results

Summary of Contents for VP1420

Reviews:

Related manuals for VP1420

Brands by name

Popular brands