VP1420 / VP1421
User Manual
29
Power LED Indication
The power pushbutton is equipped with an LED that indicates the power status
of the VP1420 / VP1421
.
Refer to the table below for the status and supported
tasks for each LED indication.
LED Indication
(Power Pushbutton)
VP1420 / VP1421 Status
Tasks
Dim
The VP1420 / VP1421 is
powered off.
To power on the VP1420 / VP1421, press
the
Power
pushbutton/button once.
Flashes orange
The VP1420 / VP1421 is
loading system
information.
Wait for the unit to finish loading
information.
Orange
The VP1420 / VP1421 is
in standby mode.
The standby mode is a power-saving
mode that shuts parts of the system down
to allow the user to quickly resume
operation when needed.
To awake the VP1420 / VP1421, press
the
Power
pushbutton/button once.
Note:
To power off the VP1420 / VP1421
when it is in standby mode, awake the unit
first, and then follow the steps in the next
entry to power off the unit.
Green
The VP1420 / VP1421 is
awaken.
To enable the standby mode to
conserve power, press the Power
pushbutton/button once.
To power off the unit:
(1) Press and hold the Power
pushbutton for 3 seconds. A
confirmation message appears in the
OSD.
(2) Press the
Power
pushbutton
once. The VP1420 / VP1421 powers
off.
Note:
The remote control can not be
used to power off the VP1420 /
VP1421.
Summary of Contents for VP1420
Page 1: ...4 x 2 True 4K Presentation Matrix Switch VP1420 VP1421 User Manual www aten com...
Page 18: ...Chapter 1 Introduction 8 This Page Intentionally Left Blank...
Page 40: ...Chapter 3 Local Operation 30 This page is intentionally left blank...
Page 56: ...Chapter 4 Remote Operation 46 This Page Intentionally Left Blank...
