ATEN VP1420, User Manual

Page: 20 / 118

Chapter 2. Hardware Setup
10
Rear View
No. Component Description
1 Grounding
Terminal Grounds the VP1420 to prevent damages from
power surge or static electricity.
2 Ethernet Port Connects to a network switch via an Ethernet cable
to allow remote operation via the web console.
3 IR Receiver Port Connects to an IR receiver to receive IR signals
from the IR remote control.
4 RS-232 Serial
Port Connects to a hardware or software controller to
transmit serial data.
5 Contact In Connects to the Contact Out terminal of a contact
closure interface.
6 LED Out Connects to the LED In terminal of a contact
closure interface
7 Audio In Receives an audio source.
8 Audio Out Connects to an active speaker.
9 Cable Tie Slot Reserved for a cable tie to hold the power adapter
in place.
10 Power Jack Receives a power adapter of the VP1420.
11 Source (1) Connects to a VGA source and a stereo audio
source.
12 Source (2), (3), (4) Each connects to an HDMI source device via an
HDMI cable.
13 HDMI Out Each connects to an HDMI-enabled display device.
4 1 2 3 7 8
9
10 11 12 13
5 6