ATEN VP1420, User Manual

Page: 33 / 118

VP1420 / VP1421 User Manual
23
VPK104
Follow the steps below to safely install the Remote Pad to the VP1420 /
VP1421. Before you start, prepare 2 screws, 1 wall box, and some core wires.
1. (Optional) Prepare your installation site and install a Wall Box.
2. Remove the faceplate from the Remote Pad.
3. Ground the Remote Pad.
a) Use core wires to serially connect the Remote Pad’s LED In (-) poles to
the GND pole of the LED Out terminal on the Presentation Switch.
b) Use core wires to serially connect the Remote Pad’s Contact Out (-)
poles to the GND pole of the Contact In terminal on the Presentation
Switch.
4. Use a core wire to connect the Remote Pad’s LED In Port 1 (+) to the LED
Out pole 1 on the Presentation Switch. Repeat this step for other LED In
Ports.
5. Use a core wire to connect the Remote Pad’s Contact Out Port 1 (+) to the
Contact In pole 1 on the Presentation Switch. Repeat this step for other
Contact Out Ports.
6. Make sure the keys are installed to the VPK104 and then secure the unit to
the wall box using two screws.
3a
4
4
3
5
5
3b