25
Chapter 3
Local Operation
Overview
This chapter provides information on operating the VP1420 / VP1421 using the
front panel and IR remote control.
Note:
The instructions use
pushbutton
to refer to the front panel and
button
to
refer to the IR remote control.
Operation Considerations
To use the IR remote control, make sure to insert the IR receiver (supplied
in the package) to the VP1420 / VP1421.
To ensure smooth operation using the IR remote control, use the IR remote
control within the effective range (6 m) and keep a clear line-of-sight
between the remote control and the IR receiver connected to the VP1420 /
VP1421.
Switching Sources
To switch the video source on a display:
1. Press a
Display Selection
pushbutton/button to select a display. The
pushbutton for the selected display lights orange.
2. Press a
Source Selection
pushbutton/button to assign the source. The
pushbutton for the selected source lights orange.
Note:
appears on the top left corner of the OSD for 5
seconds when the source is switched. This is the resolution from the
original source without scaling.
Summary of Contents for VP1420
Page 1: ...4 x 2 True 4K Presentation Matrix Switch VP1420 VP1421 User Manual www aten com...
Page 18: ...Chapter 1 Introduction 8 This Page Intentionally Left Blank...
Page 40: ...Chapter 3 Local Operation 30 This page is intentionally left blank...
Page 56: ...Chapter 4 Remote Operation 46 This Page Intentionally Left Blank...
