11
Chapter 2
Hardware Setup
Rack Mounting
The VM5404H / VM5808H can be mounted in a 19” (1U) system rack. For the
most convenient front panel pushbutton configuration and operation at the
local site, mount the unit at the front of the rack, as follows:
1. Use the M3 x 8 Phillips head hex screws supplied with the mounting kit to
screw the rack mount brackets onto the front of the unit.
2. Position the unit in the front of the rack and align the holes in the rack
mount brackets with the holes in the rack.
3. Screw the rack mount brackets to the rack.
1. Important safety information regarding the placement of this
device is provided on page 107. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation are turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.
Phillips Head Hex
M3 x 8
