Chapter 3. Front Panel Configuration
25
Operation Mode
The EDID Mode, CEC, OSD and Output Status features can be configured
from the Operation Mode page.
EDID (Extended Display Identification Data) is used to have the
VM5404H / VM5808H automatically apply a preset video
configuration or EDID Mode, which utilizes the best resolution across
different monitors
Consumer Electronics Control (CEC) allows interconnected HDMI
devices to communicate and respond to one remote control
The OSD, when enabled for a port, lets an attached display/monitor
show real-time port switching information
The Output Status shows whether the video/audio of an Output port is
turned on or off and allows viewing and setting of the Output
Resolution
To configure the VM5404H / VM5808H’s operation mode settings from the
Main Screen, use the
Menu
pushbutton to access the Menu page, press
8
or
Next
to navigate to the next page, then press pushbutton
1
to access the
Operation Mode page.
EDID Mode
To configure the EDID Mode, do the following:
1. From the Operation Mode page, press pushbutton
1
:
(Continues on next page.)
1: Operation Mode
2: Security Mode
8: Next
7: Back
1: EDID Mode
2: CEC
8: Next
