ATEN VanCryst VE8900, User Manual

Page: 86 / 122

VE8900 / VE8950 / VE8952 User Manual
74
Configuring Video Wall Settings
To apply a layout to a video wall and assign sources for display, type the
command in this format:
vw + f<video_wall_ID> + l<layout_ID> + [o<port>] + i<port> + on | off + /r/n
Control Description
<video_wall_ID> Indicates the ID of the video wall on which you wish to display the
specified layout and sources. You can also substitute this ID with
the ID of any VE8900 / VE8950 / VE8952 receiver used in the target
video wall. To look up video wall IDs, use the list
command. For
details, see Looking Up System Settings , page 73.
Example:
l<layout_ID> Indicates the ID of the layout that you wish to apply to the specified
video wall. To look up layout IDs, use the list
command. For details,
see Looking Up System Settings , page 73. Omit this element when
you want to use the same layout that is applied to the target video
wall.
Example:
i<port> Indicates the device ID, MAC ID, or the IP address of the input
(VE8900 / VE8950 / VE8952 transmitter) device you wish to use.