ATEN VanCryst VE8900, User Manual

Page: 91 / 122

Chapter 6. CLI Commands
79
Configuring the EDID Mode
To set the EDID mode of a specified VE8900 / VE8950 / VE8952 transmitter,
type the command in this format:
edid + i<port> + <EDID_mode>
+ \r\n
Example

To set the EDID mode of a VE8900 transmitter with the device ID of 16 to
auto, type
edid i016 auto
Control Description
i<port> Indicates the device ID, MAC ID, or the IP address of the output
(VE8900 / VE8950 / VE8952 transmitter) device connected to the
source of the target display. Use an asterisk (*) to target all VE8900
/ VE8950 / VE8952 transmitters in the environment.
<EDID_mode> Indicates the EDID mode you wish to set to the specified VE8900 /
VE8950 / VE8952 transmitter. Valid inputs include
default , remix ,
auto , and manual .

Default: Sets up the input to an optimum configuration based
on EDID predefined by ATEN.

Auto: Sets up the input to the highest resolution of the
connected displays.

Manual: Sets up the input to user’s configuration.

Remix: Sets up the input to an optimum resolution of the
connected displays.
Note: For Manual and Remix EDID modes, make sure to select
EDID from the Configuration Menu, see Configuration Menu ,
page 43.
\r\n Ends the command.