manualshive.com logo in svg

ATEN VanCryst VE8900, User Manual

Share
Download
ATEN VanCryst VE8900 User Manual Download Page 73

 Chapter 5. System Settings

61

Maintenance

The Maintenance tab allows you to upgrade device firmware, back up 
transmitter and receiver layouts, and restore devices to previously backed up 
settings.

Upgrading VE8900 / VE8950 / VE8952 Device Firmware

To upgrade the VE8900 / VE8950 / VE8952 device firmware, follow the steps 
below.

1. From the main screen, click 

, and click the 

Maintenance 

tab. This 

screen appears. The Firmware Upgrade section lists the detected 
transmitter and receiver devices, and their firmware versions.

2. Click 

Choose File 

to locate a previously saved firmware file.

3. Click to uncheck any devices that do not require the upgrade.

4. By default, any upgrades that involve a version rollback will be ignored. 

To apply both upgrades and version rollbacks, uncheck 

Check Firmware 

Version

.

5. Click 

Upgrade

 to start upgrading. 

Summary of Contents for VanCryst VE8900



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands