ATEN VanCryst VE8900, User Manual

Page: 68 / 122

VE8900 / VE8950 / VE8952 User Manual
56
5. Configure the settings as required.
 Name: Click to rename the transmitter.

IP Address : Specifies how the transmitter obtains its IP address. By
default, this field is set to System Auto .
 DHCP : Select this option to have the IP address automatically
assigned by a DHCP server.

System Auto : Select this option to have the IP address
automatically assigned by the VE Manager.
 Manual : Select this option to designate an IP address for the
transmitter. Manually type the IP Address, Subnet Mask, and
Gateway for the device.

Audio In : Select your audio signal type.
 EDID : After receiving EDID information from the connected display,
the VE8900T / VE8950T / VE8952T analyzes this information and
sets up the input source. Select an EDID mode that suits your needs.

Default : Sets up the input to an optimum configuration based on
ATEN’s predefined list of EDID.
 Auto : Sets up the input to the best resolution of the connected
displays.

Manual : Sets up the input to user’s configuration.
 Remix : Sets up the input to an optimum resolution of the
connected displays.

RS-232 Baud Rate : Select a suitable baud rate.
 HDCP: By default, HDCP is enabled for the VE8900T / VE8950T /
VE8952T.

Default: Click to restore the transmitter’s settings to default.
6. Click SAVE to keep the changes.