ATEN VanCryst VE8900, User Manual

Page: 85 / 122

Chapter 6. CLI Commands
73
Looking Up System Settings
You can look up the following system settings using the list command:
 Video Wall IDs
 Device ID, MAC ID, IP address, firmware version, and device name of
VE8900 / VE8950 / VE8952 transmitters and receivers
To look up system settings, type the command in this format:
list + rx | tx | device | vid \r\n
Control Description
rx Lists the system information of all VE8900 / VE8950 / VE8952
receivers in the environment, including the device IDs, MAC ID, IP
addresses, firmware versions, and device names.
tx Lists the system information of all VE8900 / VE8950 / VE8952
transmitters in the environment, including the device IDs, MAC ID, IP
addresses, firmware versions, and device names.
device Lists the system information of all VE8900 / VE8950 / VE8952
transmitters and receivers in the environment, including the device
IDs, MAC ID, IP addresses, firmware versions, and device names.
videowall Lists the video wall settings.
\r\n Ends the command.