Chapter 6. The User Interface
72
7. If you want to change the order of any of the keystrokes or insert new
keystrokes, select the macro and click
Edit
. This will put you in edit mode
and give you options to change the sort order and insert new keystrokes.
8. Repeat the procedure for any other macros you wish to create.
Once the system macros have been created, they are available for use on a
port-by-port basis. They get selected on a port’s
Port
Configuration
→
Port
Properties
Note:
1. Information about the Search function is given on page 70.
2. You can choose only one system macro per port.
3. Systems macros are stored on the switch, therefore macro names may
not exceed 64 Bytes; hotkey combinations may not exceed 256 Bytes
(each key usually takes 3–5 Bytes). System macro names only
support ASCII characters.
