KL1108V / KL1116V User Manual
159
IPv6 Settings
IP Address:
IPv6 is the new (128-bit) format for specifying IP addresses. (See
page 235 for further information.) The KVM over IP switch can either
have its IPv6 address assigned dynamically (DHCP), or it can be given
a fixed IP address.
For dynamic IP address assignment, select the
Obtain IP address
automatically
radio button. (This is the default setting.)
To specify a fixed IP address, select the
Set IP address manually
radio button and fill in the fields with values appropriate for your
network.
DNS Server
For automatic DNS Server address assignment, select the
Obtain
DNS Server address automatically
radio button.
To specify the DNS Server address manually, select the
Set DNS
server address manually
radio button, and fill in the addresses for
the Preferred and Alternate DNS servers with values appropriate
for your network.
Note:
Specifying the Alternate DNS Server address is optional.
Network Transfer Rate
This setting allows you to tailor the size of the data transfer stream to match
network traffic conditions by setting the rate at which the KVM over IP switch
transfers data between itself and the client computers. The range is from 4–
99999 Kilobytes per second (KBps).
Finishing Up
After making any network changes, be sure
Reset on exit
on the
Device
Management
→
System Operation
, page 205) has been
enabled (there is a check in the checkbox), before logging out. This allows
network changes to take effect without having to power the switch off and on.
