ATEN KE6900R, User Manual

Page: 182 / 324

KVM over IP Matrix System User Manual
164
Basic EDID Mode : EDID contains a display's basic information and is
used by the source device to utilize the best resolution across
different monitors. When
Manual
or
Remix
is selected, the
Receiver’s OSD will have a button allowing the local EDID setting
to be configured for the connection (see
EDID Mode
, page 123).
Select how you want the source device to acquire the display's
EDID:

Default : EDID is set to the default ATEN configuration. This
setting must be used when connecting KE6900 devices to
KE8950 devices.

Auto : Checks the EDID of all connected displays and uses the
best resolution for all displays.

Manual : Manually set the EDID configuration from the
Receiver’s OSD (see
EDID Mode
, page 123).

Remix : Checks the EDID of all connected displays and the
source device uses the best common resolution for all displays
(see
EDID Mode
, page 123).
Multicast Video: Select Enable to allow a broadcast of the
Transmitter’s video signal to be sent to multiple Receivers.
Multicast Audio: Select Enable to allow a broadcast of the
Transmitter’s audio signal to be sent to multiple Receivers.

Occupy Timeout : Set a time threshold for Receivers whose
Access Mode has been set to Occupy If there is no activity from
the Receiver occupying the port for the amount of time set here,
the Receiver is timed out and the port is released. The first
Receiver to send keyboard or mouse input after the port has
been released gets to occupy the port. Input a value from 1 to
240 seconds.
Port OS: Use the drop-down menu to select the operating system
on the computer connected to the Transmitter.
OS Language: Use the drop-down menu to select the operating
system language on the computer connected to the Transmitter.
CCKM IP: Set the IP address and Port number of the computer
running the KE Matrix Manager software. The default port number
is 9110.
IP Installer : The IP Installer is an external Windows-based utility
for assigning an IP address to the device. Click a radio button to
select Enable, Disable or View Only for the IP Installer utility.
See
IP Installer
, page 293 for instructions.
Item Description