ATEN ATEN VanCryst VM1600A User Manual Download Page 95

Page: 95 / 204

Chapter 4. Browser Operation

Video Wall Settings

Each icon represents an Output port and the connected display. Use the icons
to create Independent and Grouped Outputs.

Independent

Outputs will display

video on a single monitor.

Grouped

Outputs will display video across multiple

monitors as one large screen.



Click an icon to choose its

Output

and

Video Input

from the

Display

Preference

menu (see

Video Wall Example 1

, page 84).



Click multiple icons to Group Outputs (see

Grouping

, page 83).



Click

Select All

to select all outputs.



Click

Unselect All

to unselect all outputs.



Use the slidebar to zoom in and out of the display layout.



On the

Top Bar

click:



to rename the profile



to configure audio outputs (

Playing a Profile

, page 90)

Summary of Contents for ATEN VanCryst VM1600A













































































































































































































Search results

Summary of Contents for ATEN VanCryst VM1600A

Reviews:

Related manuals for ATEN VanCryst VM1600A

Brands by name

Popular brands

ATEN ATEN VanCryst VM1600A, User Manual

Search results

Summary of Contents for ATEN VanCryst VM1600A

Reviews:

Related manuals for ATEN VanCryst VM1600A

Brands by name

Popular brands