ATEN ATEN VanCryst VM1600A, User Manual

Page: 63 / 204

Chapter 3. Front Panel Operation
49
4. To switch Output ports 2, 3 and 4 to another Input port (and disconnect it
from Input port 2 ), press another Input port pushbutton to which you want
them tied.
In the example below, Input port
3 has been pressed and is now connected
to Output ports 2 , 3 and 4 .
Note:
 To cancel an output selection, press the pushbutton again.
 Pressing the Cancel pushbutton once stops the Output Port Selection
operation, and the LCD displays the active setting. Pressing the Cancel
pushbutton again turns all LEDs off.
 After 10 seconds of inactivity, all the LEDs turn off.