ATEN ATEN VanCryst VM1600A, User Manual

Page: 60 / 204

Modular Matrix Solution User Manual
46
Input Port Selection
Use the Input Port pushbuttons to select the Input port you want to configure.
To select which input source displays on each output port, do the following:
1. Press an Input port pushbutton. The Output port LED(s) tied to the said
Input port light up. In the example below, pressing Input port 1 shows it is
tied to Output ports 1 and 2 .
2. To disconnect an Output port from an Input port, press the corresponding
Output port pushbutton.
In the example below, Output port
2 has been disconnected from Input port
1 .
3. To switch to another Input port, press any Input port pushbutton. The
Output port LED(s) tied to the said Input port light up.
In the example below, pressing Input port
2 shows it is tied to Output ports
3 and 4 .
INPUT
OUTPUT
1 2 5 5* 1 1 3 4
1 2 3 4 5 6 7 8
INPUT
OUTPUT 1 2 5 5 1 1 3 4
9 10 11 12 13 14 15 16
V + A
P1