manualshive.com logo in svg

ATEN Altusen KN9000, User Manual, Page: 63 / 98

Share
Download
ATEN Altusen KN9000 User Manual Download Page 63

63

Mouse Synchronization

Mouse movements have no effect on your local system when you connect to
a remote system. Mouse movements are captured and sent to the remote
system.

You may discover from time to time, that mouse movements are no longer in
sync with the remote system’s mouse pointer. This may occur if you have
changed the video resolution.

If mouse movements are no longer in sync with the remote system’s mouse
pointer, you can synchronize them at any time by synchronizing the local and
remote video screens. The following steps show you how:

1. Press the Hotkeys combination, [F5] [F6] [F7]. The 

Video Options

 window

   displays (see figure below).

2. Click the 

Auto-Sync

 button. The video auto-sync process starts. When

    the auto-sync process has finished, click OK.

If the above action does not solve the synchronization problem, you must
take additional steps as follows:

Summary of Contents for Altusen KN9000



































































































Reviews:

No comments