52
Login Failure
The
Login failure
pane is a security feature that prevents a user from making
continuous attempts to access KN9000 with an incorrect username and
password.
The administrator controls unauthorized access by limiting both the number
of erroneous entries attempted by a user and the number of minutes a user
must wait to login again after exceeding the number of failed logins.
NOTE:
•
Login failures allowed
range is 1 –100 times.
•
Login failure time out
allowed range is 1 – 1000 minutes.
•
Forgot/Corrupt Password :
Turn off the power; short jumper labeled
Password Default
on the KN9000’s mainboard; turn on the power and wait for all the LEDs to blink;
turn off the power and open the
Password Default
jumper; start the KN9000 up.
Working Mode
The
Working Mode
pane is a security feature that controls how the KN9000
responds to KN9000 software searching for the KN9000 unit on the network.
You can select from one or both of the following two modes:
· Enable Stealth: provides the ability to hide the KN9000 from users on the
network. For example with stealth working mode enabled, if a user pings the
IP address of the KN9000, the KN9000 does not respond. If you disable
stealth-working mode and a user pings the IP address of the KN9000, the
KN9000 responds.
· Enable Echo: provides an automatic method to find the IP address of a
KN9000 unit on a Local Area Network (LAN). For example, if you enable
echo the KN9000 software automatically searches for a KN9000 and the
KN9000 responds via a message with the correct IP address. If you disable
echo, the KN9000 software automatically searches for a KN9000 and the
KN9000 does not respond. In this case, you must type the IP address in the
connection window to connect to a KN9000 unit.