18
3. Link LED
A flashing LED indicates that a Client program is accessing the device.
4. Power LED
The Power LED lights when the KN9000 is powered up and ready to
operate.
Rear Panel
The rear panel of the KN9000 contains six features as shown in the figure
below. Each number in the figure corresponds to a number in the list that
follows.
The rear panel of the unit contains the following components:
1. Power Socket
Plug the AC source power cord into the power socket.
2. Power Switch
Turn on the KN9000 with the power switch.
3. DIP Switch
(
Refer to Dip Switch Settings
)
1.
2.
3.
4.
5.
6.