17
Chapter
22222
Hardware Setup
This chapter provides you with information to setup and install the KN9000
hardware.
Front Panel
The front panel of the KN9000 contains four components as shown in the
figure below. Each number in the figure corresponds to a number in the list
that follows.
The front panel of the KN9000 contains the following components:
1. Reset Switch
Press this switch to the in position to perform a system reset.
NOTE:
This switch is recessed and must be pushed with a thin object, such as the
end of a paper clip or a ballpoint pen.
2. 10/100 Mbps Data LED
• The LED ON indicates 100 Mbps data transmission speed.
• The LED OFF indicates 10Mbps data transmission.
1
2
3
4