Atek HP 8753D, User Manual, Page: 613 / 677

K eyboards
A keyboard can be connected to the analyzer for data input such as titling les .
A keyboard can be connected to the analyzer for data input such as titling les . The
HP C1405A Option AB A keyboard with the HP part number C1405-60015 adapter is suitable for
this purpose . Or , the analyzer is designed to accept most PC-A T-compatible keyboards with a
standard DIN connector . Keyboards with a mini-DIN connector are compatible with the HP part
number C1405-60015 adapter .
Controller
An external controller is not required for measurement calibration or time domain capability .
However , some performance test procedures are semi-automated and require the use of an
external controller . (The system verication procedure does not require an external controller .)
The system can be automated with the following computers:
IBM PC compatible computer with an HP-IB/GP-IB interface card
HP 9000 series 200/300 workstation
HP 9000 series 700 workstation with HP B ASIC-UX
F or more information about compatible computers , call your nearest Hewlett-P ackard Sales and
Service oce .
Sample Software
A set of sample measurement programs is provided with the HP 8753D Network Analyzer
Programmer's Guide on a 3.5 inch disk. The programs include typical measurements to be
used as an introductory example for programming the analyzer over HP-IB . It is designed to be
easily modied for use in developing programs for specic needs . The programs are compatible
with HP B ASIC versions 2.0 and later , QuickBasic , and QuickC, and will run on an IBM PC
compatible computer (as well as the HP 9000 series 200/300/700 workstations), using any HP
8753D compatible printer or plotter .
The following additional software products are also available for the HP 8753D:
HP 85190A IC-CAP Modelling Suite
T ouchstone
(MDS) HP Microwave Design System
EEsof Series-IV
External Monitors
The analyzer can drive both its internal display and an external monitor simultaneously . One
recommended color monitor is the HP 35741A/B .
External Monitor Requirements:
60 Hz vertical refresh rate
25.5 kHz horizontal refresh rate
RGB with synchronization on green
75 ohm video input impedance
video amplitude 1 Vp-p (0.7 V = white , 0 V = black, 00.3 V = synchronization)
11-6 Compatible P eripherals