Atek HP 8753D, User Manual, Page: 585 / 677

FILE NOT COMPATIBLE WITH INSTRUMENT
Information
Message
Y ou cannot recall user graphics that had been saved on an earlier model of
analyzer with a monochrome display . These les cannot be used with the
HP 8753D .
FILE NOT FOUND
Error Number
192
The requested le was not found on the current disk medium.
FILE NOT FOUND OR WRONG TYPE
Error Number
197
During a resave operation, either the le was not found or the type of le was
not an instrument state le .
FIRST CHARACTER MUST BE A LETTER
Error Number
42
The rst character of a disk le title or an internal save register title must be
an alpha character .
FORMAT NOT VALID FOR MEASUREMENT
Error Number
75
Conversion measurements (Z or Y reection and transmission) are not valid
with Smith chart and SWR formats .
FORMATTING DATA
Information
Message
The list information is being processed for a list data output to a copy device
and stored in the copy spool buer . During this time , the analyzer's resources
are dedicated to this task (which takes less than a few seconds).
FREQ OFFSET ONLY VALID IN NETWORK ANALYZER MODE
Error Number
140
Y ou can only make frequency oset measurements in the network analyzer
mode .
10-10 Error Messages