Setup wizard
9
© 2019, ATEÏS, member of PAX ProAV Group
Press [Save] to apply settings.
Press [Step 4].
Step 4: power amplifier(s) sharing
The power amplifier from internal amplifier of main controller and external amplifier can be shared
among the main controllers and secondary local units.
Single Amplifier
Dual Channel Amplifier
The internal amplifier in the main controller can
share power amplifier with secondary local unit
(s) to expand speaker zones.
Except the internal amplifier in the main
controller, it is possible to have second amplifier
externally for system power sharing and/or
backup.
Set the group based on the number of local-net the BOUTIQUE system has. The Group 1
indicates the amplifiers in the first local network (the internal amplifier is belonged to CH1), the
Group 2 indicates the second local network, and so on.
1. Press [Edit] to change the number of amplifier for Int. amp channel and Ext. amp channel
in the selected group.
2. Press [Save] to apply settings.
Add device and set the unit ID for power amplifier sharing.
1. Press [Edit].
2. Press [ ] to set ID for the device unit, then press [Add]/[Delete] to add or remove the
unit for power sharing in the amplifier.
3. Repeat #2 to add/delete more units.
4. Press [Save] to apply settings.
