Setup wizard
7
© 2019, ATEÏS, member of PAX ProAV Group
After completed the hardware wiring, the LCD
panel will activate automatically once it is
powered.
Press the touch panel to start the system
setup.
1.
2.
Replace (replace the broken main
controller with the new one)
New setup
Step 1: language
Press [
] on touch panel to set the
language.
Press [OK].
Step 2: number of main and secondary units & ID
Set the number of main controller and secondary unit and its ID in the system. The ID is composed
of the number of X, Y. X indicates the global net ID and Y is the local net ID.
Network
Local Network:
*for BTQ-SL8 connection
Max. digi-link units: 31
Max. cable length: 10m between units
(shielded RJ45 connector, STP CAT5/6)
Global Network:
*for BTQ-VMxx/BTQ-SG8
connection
Max. global net units: 64
Max. cable length: 100m between units
(CAT5/6), multi-mode (2km), single-mode
(20km) fibre optics
Set the number of controllers (VM4/VM8/VM8W1/VM8W2) and secondary global units (SG).
