Setup wizard
11
© 2019, ATEÏS, member of PAX ProAV Group
Press [Next] to get monitor reference.
Press [Ready] and [Activate] to enter the menu window.
Replace
When replacing the broken main controller with the
new one, proceed the Replace function to configure
and synchronize the system with the broken device
only.
1. If the USB flash drive is connected on BTQ-VM4/
VM8/SG8, click [Yes] to use the config. file from
USB to replace (figure 1).
If the USB flash drive is not connected, the system
will display the alert window (figure 2).
2. If not using the file from USB flash drive, click [Skip]
to skip the step.
figure 1
figure 2
Step 1: net ID
Select the netcard ID of the ''new'' BTQ-VM4/VM8 controller used to replace the broken one.
Click [Next] to apply the setting.
