© 2019, ATEÏS, member of PAX ProAV Group
10
Setup wizard
Set CH1: Amp 1 power.
1. Press [
] to change the power (wattage) of which Int./Ext. amplifier channel, and
[Save] the settings.
2. Press [ ] for the CH1, Amp2 settings, and repeat the same procedure for other amplifier
(s) settings.
3. Press [Step 5].
Step 5: dummy load capacitor
Calculate dummy load capacitance and DIP switch setting.
DLC Installation
1. Each speaker zone has A/B sub zones. Each sub zone requires a dummy load capacitor
in the end of speaker line.
2. Set the indicated number to ON position on the DIP switch.
3. Press [Next].
Step 6: monitoring
Set the monitor tolerance of speaker line impedance and power amplifier.
1. Press [Next] to apply the preset tolerance, impedance and amplifier gain.
Or press [Edit] to change the tolerance of percentage.
2. Press [Save] to apply settings.
