background image

5. How do you get warranty service?

To obtain warranty service in the United States of America, visit  

www.telephones.att.com

 or call 

1 (888) 915-2007

. In Canada, call  

1 (866) 288-4268

. NOTE: Before calling for service, please review the user’s manual; a 

check of the PRODUCT’s controls and features may save you a service call.
Except as provided by applicable law, you assume the risk of loss or damage during transit and 
transportation and are responsible for delivery or handling charges incurred in the transport 
of the PRODUCT(s) to the service location. The manufacturer will return repaired or replaced 
PRODUCT under this limited warranty to you. Transportation, delivery or handling charges are 
prepaid. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the 
PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the 
terms of this limited warranty, the manufacturer will notify you and will request that you authorize 
the cost of repair prior to any further repair activity. You must pay for the cost of repair and 
return shipping costs for the repair of products that are not covered by this limited warranty.

6. What must you return with the PRODUCT to get warranty service? 

You must:

Return the entire original package and contents including the PRODUCT to the service 
location along with a description of the malfunction or difficulty; and
Include a “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased 
(PRODUCT model) and the date of purchase or receipt; and
Provide your name, complete and correct mailing address, and telephone number.

7. Other limitations

This warranty is the complete and exclusive agreement between you and the manufacturer of 
this AT&T branded PRODUCT. It supersedes all other written or oral communications related to 
this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty 
exclusively describes all of the manufacturer’s responsibilities regarding the PRODUCT. There are 
no other express warranties. No one is authorized to make modifications to this limited warranty 
and you should not rely on any such modification.
State/Provincial Law rights: This warranty gives you specific legal rights, and you may also have 
other rights which vary from state to state or province to province.
Limitations: Implied warranties, including those of fitness for a particular purpose and 
merchantability (an unwritten warranty that the PRODUCT is fit for ordinary use) are limited to 
two years from date of purchase. Some states/provinces do not allow limitations on how long 
an implied warranty lasts, so the above limitation may not apply to you. In no event shall the 
manufacturer be liable for any indirect, special, incidental, consequential, or similar damages 
(including, but not limited to lost profits or revenue, inability to use the PRODUCT or other 
associated equipment, the cost of substitute equipment, and claims by third parties) resulting 
from the use of this PRODUCT. Some states/provinces do not allow the exclusion or limitation of 
incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Please retain your original sales receipt as proof of purchase.

Appendix

Limited warranty

97

Summary of Contents for SynJ SB67158





















































































































Reviews: